Q&A

	TROUBLES	CAUSES	REMEDY
	Needle Thread Breakage	Needle not properly threaded Something is wrong with the needle Thread is too slim for material	Properly thread the machine Properly load the needle into needle clamp Change material or change thread
	Bobbin Thread Breakage	Incorrectly threading for bobbin case cap Feed Dog dirty in shuttle race	Properly thread the machine Clean and oil hook assembly
	Stitch Skipping	Needle is bent or blunt Needle has been loaded incorrectly	Replace Needle Properly load the needle into needle clamp
	Needle Breakage	You are pulling on the fabric Thread size not suited for fabric Needle not properly fitted	Do not pull on fabric Adjust stitch length or width Properly load the needle into needle clamp
	Intermitent Feed	Incorrect needle gauge Dirty feed dog	Change needle gauge Clean feed dog
	Irregular Stitches	Needle incorrectly threaded Bobbin incorrectly threaded Needle blunt Incorrect needle tension	Properly thread the machine properly thread the machine Replace needle Adjust tension settings
	Excessive Noise	Dirty feed dog or shuttle race	Clean and oil
	Machine does not power up	Bad socket and plug Power cable not plugged in	Replace wall socket Properly connect to the power outlet

Copyright ©2005-2008 CHINA FEIYUE USA INC.	Home Q&A Services Contacts Location Feiyue