Sewing Accessories

INDUSTRIAL SEWING MACHINE MOTORS

DOL12H/L and DOL34H/L

Industrial High and Low Speed Clutch Motor

Watts: 400 Watts & 550 Watts available

Power: 110 Volts

Rotation: Bi-directional

RPM: 1725 (Low Speed Motor)

RPM: 3450 (High Speed Motor)

Shaft: AMCO Shaft

Weight: Approximately 42 Lbs

Available Pulleys: 630, 632, 634
Hardware & Belt Cover included

* FESM-550N Shown

* FESM-550C Shown

FESM-400N (400W) - FESM-550N (550W)

Family Electronic Servo Motor

Watts: FESM-400N - 400 Watts
Watts: FESM-550N - 550 Watts

Power: 110V Single Phase
Rotation: Bi-directional (Through switch)
RPM: 0-3450 RPM

Description: High Torque D.C. Compact Electronic Servo Direct Motor

Adjustment: Easy to ajust FINE TUNE speed adustment dial
Light Socket, Energy Saving, High Torque, Quiet

Shaft: AMCO Shaft - Weight: Approximately 28 Lbs

Available in 400Watts and 550Watts - Compact Design with high torque and low noise.

FESM-400C (400W) - FESM-550C (550W)

Watts: FESM-400C - 400 Watts
Watts: FESM-550C - 550 Watts

Power: 110V Single Phase
Rotation: Bi-directional (Through switch)
RPM: 0-3450 RPM
Shaft: AMCO Shaft - Weight: Approximately 30 Lbs

FESM-400C and FESM-550C with FINE TUNE Techonology offers convienice in speed adjustment. Select your speed with the adjustment dial and further adjust the speed of the motor by controlling the foot pedal.

Pre-select dial settings: 500, 800, 1000, 1300, 1500, 1700, 2000, 2400, 2600, 2900, 3100, 3400 R.P.M.

TABLE TOPS FOR INDUSTRIAL SEWING MACHINES

Standard Industrial machine & submergible table top

Table tops available:

Industrial Blindstitch table top

Juki type Single Needle table top

Walking Foot table top

Zig Zag table top

Coverstitch table top

Submergible Overlock table top (Siruba, Pegasus, Juki types)

Blank table top available

ADJUSTABLE "L" and "K" TYPE LEGS (Non Adj. & Adj.) - SPACE SAVER (Free Arm) AVAILABLE

FAMILY DRESS FORMS - MISSY TYPE FORM W/ HIPS

MISSY TYPE PROFESSIONAL SERIES FORM W/ HIPS

Size	4	6	8	10	12	14	16	18
Neck wid.	12 1/2	13	13 1/2	14	14 1/2	15	15 1/2	16 1/2
Bust wid.	33 1/2	34 1/2	35 1/2	36 1/2	38	39 1/2	41	43 1/2
Waist wid.	25	25 1/2	26 1/2	27 1/2	29	30 1/2	32	34 1/2
Stern	35	35 1/2	36 1/2	37 1/2	39	40 1/2	42	45
Shoulder	4 7/16	5	5 1/8	5 1/4	5 7/16	5 5/8	5 13/16	6
Front len.	14	14 1/4	14 1/2	14 3/4	15	15 1/4	15 1/2	15 3/4
Back len.	16	16 1/4	16 1/2	16 3/4	17	17 1/4	17 1/2	17 3/4
Breast Spr.	6 3/4	7	7 1/4	7 1/2	7 3/4	8	8 1/4	8 1/2
Back wid.	13 3/4	14	14 1/4	14 1/2	14 7/8	15 1/8	15 1/2	16
Measurements are given in inches. Assembly Instruction HERE MEN'S DRESS FORM SIZES 40, 42, 44, 46 and 48 AVAILABLE - ** NOTE - ALL DRESS FORMS MEASUREMENTS ARE GIVEN AS REFERENCE ONLY AND WERE MEASURED BASED ON A MEASUREMENT STANDARD. IF THOSE MEASUREMENT STANDARD POINTS ARE NOT DUPLICATED YOUR MEASUREMENTS MIGHT DIFER.

*Actual dimensions will vary according to sizes